Aromatic Cedar Knotty Plank wood veneer 24" x 96" on paper backer 1/40" thick

Description

Aromatic Cedar wood veneer in 24" x 96" sheets with paper backer 2' x 8' x 1/40" thickness A grade quality.
Pictures are representative of actual product since this a natural product and will vary in color and grain. This product will haves some areas where wood filler was used. This is normal for this wood. Some pictures may be of other sizes, customer projects and be wet or finished to show what the product is likely to look like when finish is applied. Wood has the distinct aroma that comes with it. Grain runs the longer direction despite what may be shown in pictures. Each sheet carefully inspected and packaged by our company. Detailed application instructions included. Popular product.
This wood has knots and voids that may have to be filled, so expect imperfections in the wood. It is unlike most other wood veneers in that regard.
Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.
Visit My eBay Store: JSO Wood Products
Other sizes and unbacked veneer may be available.
About pictures
:
Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.
Backed products
come with complete application instructions
that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.
Thickness
:
(will not always be exactly correct, but relatively close)
Paper-backed veneers = 1/40”
Wood-backed veneers = 1/25”
Raw plain veneer with no backing = 1/32”-1/42”
How to cut
:
generally cut with a razor/box knife or similar tools and some type of straight edge.
How to apply
:
Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying.
How to finish
:
most any conventional finishing products can be used with veneer that is applied correctly.
Disclaimer:
Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldn’t impact overall quality or satisfaction. There may also be some minor wood filler used to fill cracks and other crevices that may exist. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect.
Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection.