Industrial Dust Collector Micro Air RP1

Description

Micro Air RP1 Twister single cartridge, 1000 CFM collector
Micro Air® dust collectors utilize cartridge filtration to meet the requirements for capturing harmful contaminants generated in a multitude of industrial processes.   Modular design provides ability to bank units together for virtually an unlimited number of cartridges.  All are designed to meet OSHA / NFPA and Industrial Ventilation Standards and are sized and rated for the proper air-to-cloth ratio to solve clean air issues in a wide variety of applications such as welding, grinding, laser cutting, plasma cutting, abrasive blasting, pharmaceutical, chemical processing, thermal spray, mixing etc.
Key to our models is a revolutionary cleaning system called Roto-Pulse®. This is an on line system that continually cleans the filters with a revolving, compressed air driven, tube. As air enters the tube, the force of the pulse causes the tube to rotate incrementally inside the cartridge. While rotating, air exits the pre-drilled holes in the tube. The result is that air hits the entire inside length of the cartridge, pulsing dirt particles away from the filter for a much more efficient cleaning cycle, thus extending filter life.
Typical Applications:
Grinding Dust
Welding Smoke & Fumes
Bag-filling Operations
Mixing Operations
Routing
Features:
1000 CFM
Cartridge Collector With Unique Cyclonic Drop-Out Feature.
72 DBA at Operator
99.999% Efficient Fire Retardant Cartridge Filter
Roto-Pulse Filter Cleaning
8” Blast Gate for Easy Cleanup.
1 1/2 HP, 120 Volt Motor/Blower With On/Off Selector Switch
Overall Dimensions:
18.5” ROUND X 72.5” H
Weight:
225 LBS
Cabinet:
12 GAUGE WELDED GALVANEALED STEEL WITH EXTERIOR SURFACES GROUND SMOOTH
Finish:
INDUSTRIAL GRADE TEXTURED, BAKED CRIMSON RED ENAMEL PAINT INSIDE AND OUT
Filtration:
ONE 99.97% EFFICIENT, FIRE RETARDANT CARTRIDGE WITH 174 SF REDMAX® MEDIA— MERV 11
Cartridge Cleaning System:
ROTO-PULSE® UNIQUE ROTATING TUBE WITH PRE-DRILLED HOLES. AS AIR IS PULSED INTO THE TUBE, IT ROTATES AND AIR EXITS THE PRE-DRILLED HOLES, PROVIDING A HIGHLY EFFICIENT AND TOTAL CLEANING OF THE CARTRIDGE FILTER.
Filter Change Indicator:
MAGNAHELIC GAUGE
Filter Access:
THROUGH BOTTOM OF UNIT—SIMPLY REMOVE BOTTOM FLANGE CLAMP FOR ACCESS Motor 1 1/2 HP, 120 V, 60 HZ, TEFC MOTOR, THERMALLY PROTECTED
Blower
: HIGH PRESSURE DIRECT DRIVE BLOWER, 3450 RPM
Air Volume
: 1,000 CFM—CONSULT BLOWER CURVES FOR SPECIFIC CONFIGURATIONS
Controls
: FRONT, CABINET MOUNTED ON/OFF SWITCH, MANUAL PULSE BUTTON TO ENABLE CARTRIDGE CLEANING CYCLE
Noise level
: 72 DBA MEASURED 5’ FROM THE EXHAUST GRILLE
Listing and template services provided by inkFrog