MIDNITE SOLAR MNPV3 PV COMBINER BOX FOR SOLAR PANEL WIND TURBINE WIND GENERATOR

Description

MidNite Solar MNPV3 PV Combiner
MidNite Solar MNPV3 PV Combiner
*** THIS IS THE FOR COMBINER BOX ONLY....THE BREAKERS AND FUSE HOLDERS ARE SOLD
SEPARATELY
The MNPV series of combiners are the result of 20 years of design and manufacturing experience in the renewable energy industry.
Each unit has the same quality features such as:
Aluminum rain proof type 3R enclosure
Internal plastic injection molded dead front cover
Knock outs for lightning arrestors
Knock outs that accept waterproof stain reliefs, conduit or panel mount MC type connectors
Uses 150VDC & 300VDC breakers or 1000VDC fuses depending on model number
ETL listed to UL1741 for use in the US and Canada
Adaptable for two separate inverters or charge controllers on certain models
Description:
Enclosure Only
(For 150 VDC charge controllers and 600 VDC grid tie inverters)
Gray aluminum type 3R rainproof enclosure with deadfront, will accept three 150VDC (MNEPV) breakers or two 600 VDC fuse holders.
Includes a 60 amp plus bus bar, 6 position PV negative bus bar and a 6 position ground bus bar.
Photos show MNPV3 with either breakers or fuses (
Breakers/fuse holders sold separately)
Type 3R environmental rating
Warranty - 5 yrs.
Listed by ETL for US & Canada
Made in the USA
MidNite Solar MNPV3 Combiner Specifications:
Enclosure rating:
Outdoor Rainproof Type 3R
Enclosure material:
Powder coated aluminum with stainless hardware
Mounting options and angle:
Vertical wall mount, pole mount or sloped roof mount to 14 degrees incline (3 in 12 roof pitch)
Number of PV strings:
Three strings using breakers up to 150 volts or two strings using fuses up to 600 volts
Maximum number of output circuits:
1 for all
Wire range for string  input:
14-6 AWG
OCPD Included:
No
Maximum OCPD rating:
30 amp with fuses and 63 amps with 150 volt breakers
Maximum outputamps
:
60 amps for all
Output wire range:
14 to 1/0 AWG
Lug temperature rating:
90 deg C
Deadfront:
Custom molded plastic deadfront
Lockable:
Yes
Rating:
UL1741
MNPV3 Combiner Dimensions:
Size:
10.5"L x 4.5"W x 3.5"D
Shipping:
11"L x 5"W x 4"D
Weight:
2 Lbs
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier - USA
UP TO 50% DISCOUNTS
TOP BRANDS
Payment
Shipping
Returns
Payment
Shipping
Returns
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
See our other items
Thank you for visiting our Ebay store!
MidNite Solar MNPV3 PV Combiner The MNPV series of combiners are the result of 20 years of design and manufacturing experience in the renewable energy industry. Each unit has the same quality features such as: ---Aluminum rain proof type 3R enclosure ---Internal plastic injection molded dead front cover ---Knock outs for lightning arrestors ---Knock outs that accept waterproof stain reliefs, conduit or panel mount MC type connectors ---Uses 150VDC & 300VDC breakers or 1000VDC fuses depending on model number ---ETL listed to UL1741 for use in the US and Canada --- Adaptable for two separate inverters or charge controllers on certain models Description: Enclosure Only (For 150 VDC charge controllers and 600 VDC grid tie inverters) Gray aluminum type 3R rainproof enclosure with deadfront, will accept three 150VDC (MNEPV) breakers or two 600 VDC fuse holders. Includes a 60 amp plus bus bar, 6 position PV negative bus bar and a 6 position ground bus bar. Photos show MNPV3 with either breakers or fuses. Breakers/fuse holders sold separately. ---· Type 3R environmental rating ---· [Warranty - 5 yrs.] (http://www.midnitesolar.com/pdfs/MIDNITE_SOLAR_INC_Warranty.pdf) ---· Listed by ETL for US & Canada ---· Made in the USA MidNite Solar MNPV3 Combiner Specifications: Enclosure rating: Outdoor Rainproof Type 3R Enclosure material: Powder coated aluminum with stainless hardware Mounting options and angle: Vertical wall mount, pole mount or sloped roof mount to 14 degrees incline (3 in 12 roof pitch) Number of PV strings: Three strings using breakers up to 150 volts or two strings using fuses up to 600 volts Maximum number of output circuits: 1 for all Wire range for string input: 14-6 AWG OCPD Included: No Maximum OCPD rating: 30 amp with fuses and 63 amps with 150 volt breakers Maximum outputamps: 60 amps for all Output wire range: 14 to 1/0 AWG Lug temperature rating: 90 deg C Deadfront: Custom molded plastic deadfront Lockable: Yes Rating: UL1741 MNPV3 Combiner Dimensions: Size: 10.5"L x 4.5"W x 3.5"D Shipping: 11"L x 5"W x 4"D Weight: 2 Lbs
MidNite Solar MNPV3 PV Combiner
MidNite Solar MNPV3 PV Combiner
The MNPV series of combiners are the result of 20 years of design and manufacturing experience in the renewable energy industry. Each unit has the same quality features such as:
Aluminum rain proof type 3R enclosure
Internal plastic injection molded dead front cover
Knock outs for lightning arrestors
Knock outs that accept waterproof stain reliefs, conduit or panel mount MC type connectors
Uses 150VDC & 300VDC breakers or 1000VDC fuses depending on model number
ETL listed to UL1741 for use in the US and Canada
Adaptable for two separate inverters or charge controllers on certain models
Description:
Enclosure Only
(For 150 VDC charge controllers and 600 VDC grid tie inverters)
Gray aluminum type 3R rainproof enclosure with deadfront, will accept three 150VDC (MNEPV) breakers or two 600 VDC fuse holders.
Includes a 60 amp plus bus bar, 6 position PV negative bus bar and a 6 position ground bus bar.
Photos show MNPV3 with either breakers or fuses.
Breakers/fuse holders sold separately.
·       Type 3R environmental rating
·
Warranty - 5 yrs.
·        Listed by ETL for US & Canada
·        Made in the USA
MidNite Solar MNPV3 Combiner Specifications:
Enclosure rating:
Outdoor Rainproof Type 3R
Enclosure material:
Powder coated aluminum with stainless hardware
Mounting options and angle:
Vertical wall mount, pole mount or sloped roof mount to 14 degrees incline (3 in 12 roof pitch)
Number of PV strings:
Three strings using breakers up to 150 volts or two strings using fuses up to 600 volts
Maximum number of output circuits:
1 for all
Wire range for string  input:
14-6 AWG
OCPD Included:
No
Maximum OCPD rating:
30 amp with fuses and 63 amps with 150 volt breakers
Maximum outputamps
:
60 amps for all
Output wire range:
14 to 1/0 AWG
Lug temperature rating:
90 deg C
Deadfront:
Custom molded plastic deadfront
Lockable:
Yes
Rating:
UL1741
MNPV3 Combiner Dimensions:
Size:
10.5"L x 4.5"W x 3.5"D
Shipping:
11"L x 5"W x 4"D
Weight:
2 Lbs
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier - USA
UP TO 50% DISCOUNTS
TOP BRANDS
See our other items
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Shipping
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Thank you for visiting our Ebay store!
MidNite Solar MNPV3 PV Combiner
The MNPV series of combiners are the result of 20 years of design and manufacturing experience in the renewable energy industry. Each unit has the same quality features such as:
Aluminum rain proof type 3R enclosure
Internal plastic injection molded dead front cover
Knock outs for lightning arrestors
Knock outs that accept waterproof stain reliefs, conduit or panel mount MC type connectors
Uses 150VDC & 300VDC breakers or 1000VDC fuses depending on model number
ETL listed to UL1741 for use in the US and Canada
Adaptable for two separate inverters or charge controllers on certain models
Description:
Enclosure Only
(For 150 VDC charge controllers and 600 VDC grid tie inverters)
Gray aluminum type 3R rainproof enclosure with deadfront, will accept three 150VDC (MNEPV) breakers or two 600 VDC fuse holders.
Includes a 60 amp plus bus bar, 6 position PV negative bus bar and a 6 position ground bus bar.
Photos show MNPV3 with either breakers or fuses.
Breakers/fuse holders sold separately.
·       Type 3R environmental rating
·
Warranty - 5 yrs.
·        Listed by ETL for US & Canada
·        Made in the USA
MidNite Solar MNPV3 Combiner Specifications:
Enclosure rating:
Outdoor Rainproof Type 3R
Enclosure material:
Powder coated aluminum with stainless hardware
Mounting options and angle:
Vertical wall mount, pole mount or sloped roof mount to 14 degrees incline (3 in 12 roof pitch)
Number of PV strings:
Three strings using breakers up to 150 volts or two strings using fuses up to 600 volts
Maximum number of output circuits:
1 for all
Wire range for string  input:
14-6 AWG
OCPD Included:
No
Maximum OCPD rating:
30 amp with fuses and 63 amps with 150 volt breakers
Maximum outputamps
:
60 amps for all
Output wire range:
14 to 1/0 AWG
Lug temperature rating:
90 deg C
Deadfront:
Custom molded plastic deadfront
Lockable:
Yes
Rating:
UL1741
MNPV3 Combiner Dimensions:
Size:
10.5"L x 4.5"W x 3.5"D
Shipping:
11"L x 5"W x 4"D
Weight:
2 Lbs